Nova Insert Nova 1" 8 TPI RH W/SET SCREW FOR REV.
Couldn't load pickup availability
Adapt your Insert Type NOVA chuck to a 1″ x 8TPI RH lathe. Allows you to keep the same chuck and accessories if you change your lathe. You only need to change the insert/adpater. The internal thread is 1″ x 8TPI RH and the external thread matches the NOVA insert type chucks to simply and easily screw into the back of your NOVA Insert Type Chuck.
Chuck Insert/Adaptors
The thread sizes listed are the size which the adaptor converts to
(e.g. The thread size listed in the table should match the thread size on your lathe spindle.)
Click here if you don’t know your lathe spindle thread size.
Sizes listed below are subject to change.
Always best to check with your lathe manual and manufacturer.
| SKU | Thread Diam. |
Pitch | Thread Direction |
Standard | Compatible Lathes |
Set Screw |
|---|---|---|---|---|---|---|
| I2NS | M20 | 2 | RH | Tyme Cub | ||
| I3NS | M20 | 1.5 | RH | Electra Beckum, Multico Sumaro |
||
| I4NS | M33 | 1.5 | RH | OneWay, Multico Sumaro |
||
| I6NS | 3/4″ | Plain Bore | M6 | |||
| I7NS | 1 1/8″ | 8TPI | UN(NOT UNC) | |||
| I8NS | 7/8″ | 12TPI | LH | NS | ||
| I9NS | 3/4″ | 16TPI | RH | (with 6mm register) | ||
| IANS | 3/4″ | 14TPI | RH | BSP | TL1000 (pre 1986) | |
| IBNS | 3/4″ | 14TPI | LH | BSP | TL1000 (pre 1986) | |
| ICNS | 1″ | 10TPI | RH | BSF | TL1000, Woodfast/Durden | |
| IDNS | 1″ | 8TPI | RH | UNC | Delta, Rockwell, Golding, General, NOVA Comet (North America) and Mercury lathes |
|
| IENS | 1″ | 12TPI | RH | UNF | Myford ML8 Turnstyler |
|
| IHNS | 3/4″ | 10TPI | RH | BSW | Rockwell Homecraft |
|
| IINS | M24 | 3 | RH | B-Line Arundel K600/K450 |
||
| IJNS | 1 1/8″ | 12TPI | RH | BSW | Myford Mystro Masterlathe (New Zealand) |
|
| IKNS | M18 | 2.5 | RH | Elu DB 180 | ||
| ILNS | 1 1/4″ | 8TPI | RH | NOVA Galaxi, NOVA Saturn, NOVA DVR 3000, NOVA XP, NOVA 1624 and 1624 II (North America) | M6 | |
| IMNS | 1″ | 10TPI | LH | BSF | TL1000 Woodfast/Durden |
|
| INNS | Blank (Can be threaded up to 28mm) | |||||
| IONS | 1 1/8″ | 7TPI | RH | BSW | Morton | |
| IQNS | M30 | 3.5 | RH | NOVA TL1500/3000/Comet (European & S. Hemisphere) Woodfast |
||
| IRNS | 1″ | 8TPI | RH | Jet 1221 Lathe | ||
| ISNS | 5/8″ | Plain Bore | Designed Specifically for Shopsmith Pro V and Power Pro Machines | M6 | ||
| ITNS | 1″ | 8TPI | Dual Threaded LH & RH | NOVA Mercury Mini Lathe | ||
| IUNS | 1 1/8″ | 12TPI | RH | UNF | Taiwanese lathes | |
| IVNS | 7/8″ | 14TPI | RH | NF | ||
| IYNS | 1 1/4″ | 8TPI | RH | For lathes don’t have reverse turning ability |
||
| IWNS | M25 | 2 | RH | Tyme Avon (’83 on) and Classic Tanner SD165, Selbix Springwood, Sorby, Cotech | ||
| IXNS | 1″ | 8TPI | RH | Designed specifically for the NOVA Comet II Midi Lathe, features lock for the reverse function. |
M6 | |
Safety Advisory! Only use authentic NOVA accessories on your NOVA chuck. Using non genuine NOVA and copies of accessories could lead to operation and safety issues and will void our market leading warranty. NOVA accessories are designed for use only on NOVA Chucks. Do not use on any other chuck.
SPECIFICATION
- Internal Thread is 1″ x 8TPI RH (M6 Set Screw), to fit all 1″ x 8TPI RH lathes
- Precision machined from a solid billet 1045 High Tensile Steel
- Fits all NOVA Insert Chucks for maximum flexibility and adaptability
- Adapt your NOVA chuck to almost any lathe (depending on insert thread size)
- 6-Year Full Replacement Warranty
California Residents Proposition 65
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.
WARNING: This product can expose you to chemicals (Rust Prevention Oil) which are known to the State of California to cause cancer. Always wash your hands after unpacking the product for first use and use in a well ventilated area. Dispose of packaging bags thoughtfully.
For more information go to: P65Warnings.ca.gov
