R.I.P. Precision Tools 2.5" Surfacing Bit - Slab Slayer- 1/2" Shank
This surfacing bit IS recommended with the Clean Cut Router Sled!
Cutting Dia. 2.5"
Body Dia. 2.98"
Shank Dia. .500"
Over All Length 3.0"
Electroless Nickel Plated steel body
Insert Style 45 Degree
- Resurfacing Spoilboards
- Flatening and Surfacing Slabs, lumber and wood panels
- for use in both Both CNC and Router Sleds
- Chamfering edges
- Epoxy Surfacing
Exceptional performance and finish quality in the following materials
- Soft and Hard Woods
- uplifting Vortex greatly increasing chip extraction
- 4 Sided DLC Coated inserts provide exceptional finish quality
- 45 Degree design allows tool to be used to chamfer edges and plunge up to 7/16" deep
- Quietest and most efficient tool on the market
Introducing a new breed of surfacing bit !
This crossover surfacing bit is designed for fast, efficient surfacing and flattening.
The razor sharp solid carbide inserts and positive rake produce a blemish free smooth surface on end grain wood and epoxy with no chip out in epoxy finishes commonly seen with the standard surfacing tools on the market.
45 Degree style means less force needed to cut the same material! And greatly reduced drag and tool wear compared to typical 90 degree style tools where the entire length of all inserts are dragging across the material.
Efficient cutting that requires less HP than any other tool on the market. Better chip extraction thanks to the specialized geometry of the flutes that create lift and pull chips up into the dust boot rather that eject them to the side.
Phenomenal Finish that requires little to no secondary sanding operations. Smooth as glass finish on end grain!
And unlike most surfacing tools, the Slab Slayer can plunge cut up to 7/16" deep. It can be used for large pocketing operations, or as a chamfering tool with its 45 degree side cutting edge.
Speaking of cutting edges? The inserts are designed with razor sharp cutting edges, positive rake and geometries that help with chip control and cutting effeciency.
Like all of our tools, the inserts are DLC coated for Extreme durability, greatly increased tool life and Superior finish!