Nova Insert Nova 1 1/4" 8 TPI UNS

SKU: ILNS
$24.99
By Nova

Adapt your Insert Type NOVA chuck to a 1 1/4″ 8TPI UNS RH lathe. Allows you to keep the same chuck and accessories if you change your lathe. You only need to change the insert/adaptor. The internal thread is 1 1/4″ 8TPI UNS RH and the external thread matches the NOVA insert type chucks to simply and easily screw into the back of your NOVA Insert Type Chuck. Now your NOVA insert type chuck is ready to attach to your 1 1/4″ 8TPI UNS RH threaded lathe spindle.

Chuck Insert/Adaptors

The thread sizes listed are the size which the adaptor converts to
(e.g. The thread size listed in the table should match the thread size on your lathe spindle.) 
Click here if you don’t know your lathe spindle thread size. 

Sizes listed below are subject to change.
Always best to check with your lathe manual and manufacturer.

SKU Thread
Diam.
Pitch Thread
Direction
Standard Compatible
Lathes
Set Screw
I2NS M20 2  RH  Tyme Cub
I3NS M20 1.5  RH  Electra Beckum,
Multico Sumaro
I4NS M33 1.5  RH  OneWay,
Multico Sumaro
I6NS 3/4″ Plain Bore  M6
I7NS 1 1/8″ 8TPI UN(NOT UNC)
I8NS 7/8″ 12TPI LH NS
I9NS 3/4″ 16TPI RH (with 6mm register)
IANS 3/4″ 14TPI RH BSP  TL1000 (pre 1986)
IBNS 3/4″ 14TPI LH BSP  TL1000 (pre 1986)
ICNS 1″ 10TPI RH BSF  TL1000, Woodfast/Durden
IDNS 1″ 8TPI RH UNC  Delta, Rockwell, Golding,
General, NOVA Comet (North America)
and Mercury lathes
IENS 1″ 12TPI RH UNF  Myford ML8
Turnstyler
IHNS 3/4″ 10TPI RH BSW  Rockwell
Homecraft
IINS M24 3 RH  B-Line
Arundel K600/K450
IJNS 1 1/8″ 12TPI RH  BSW  Myford Mystro
Masterlathe (New Zealand)
IKNS M18 2.5 RH  Elu DB 180
ILNS 1 1/4″ 8TPI RH NOVA Galaxi, NOVA Saturn, NOVA DVR 3000, NOVA XP, NOVA 1624 and 1624 II (North America)  M6
IMNS 1″ 10TPI LH BSF  TL1000
Woodfast/Durden
INNS Blank (Can be threaded up to 28mm)
IONS 1 1/8″ 7TPI RH BSW Morton
IQNS M30 3.5 RH NOVA TL1500/3000/Comet
(European & S. Hemisphere)
Woodfast
IRNS 1″ 8TPI RH Jet 1221 Lathe
ISNS 5/8″ Plain Bore Designed Specifically for Shopsmith Pro V and Power Pro Machines  M6
ITNS 1″ 8TPI Dual Threaded LH & RH NOVA Mercury Mini Lathe
IUNS 1 1/8″ 12TPI RH UNF Taiwanese lathes
IVNS 7/8″ 14TPI RH NF
IYNS 1 1/4″ 8TPI RH For lathes don’t
have reverse turning ability
IWNS M25 2 RH  Tyme Avon (’83 on) and Classic Tanner SD165, Selbix Springwood, Sorby, Cotech
IXNS 1″ 8TPI RH Designed specifically for the NOVA Comet II Midi Lathe,
features lock for the reverse function.
 M6

 

Safety Advisory! Only use authentic NOVA accessories on your NOVA chuck. Using non genuine NOVA and copies of accessories could lead to operation and safety issues and will void our market leading warranty. NOVA accessories are designed for use only on NOVA Chucks. Do not use on any other chuck.

SPECIFICATION

  • Fits NOVA 1 1/4″ thread reversible lathes
  • Internal Thread is 1 1/4″ 8TPI UNS RH (M6 Set Screw), to fit all 1 1/4″ 8TPI UNS RH lathes (NOVA Neptune, NOVA Nebula, NOVA Galaxi, NOVA Saturn, NOVA DVR 3000, NOVA XP, NOVA 1624 and 1624 II -North America)
  • Precision machined from a solid billet 1045 High Tensile Steel
  • Fits all NOVA Insert Type Chucks for maximum flexibility and adaptability
  • Quickly and inexpensively adapt your NOVA chuck to almost any lathe depending on insert thread size.
  • 2-Year Full Replacement Warranty

        California Residents Proposition 65
        WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.

        WARNING: This product can expose you to chemicals ​(Rust Prevention Oil) ​which are known to the State of California to cause cancer​. ​Always wash your hands after unpacking the product for first use and use in a well ventilated area. Dispose of packaging bags thoughtfully.

        For more information go to: P65Warnings.ca.gov